|
 |
 |
|
 |
 |
| |
The EEC-96 is a new generation eddy current system
with full-digital, multi-friquency, multi-channel, permulti-frequency, low-frequency eddy current and
Remote-field eddy current. This intelligent tester is
designed for fast in service tube inspection , real-time
effectively defect detection of metal materials, thickness measurement and sorting materials by
metallurgical differences, and weld inspection,
assembly line inspection of pipes. |
| |
The advantages of the EEC-96 |
| · |
High Detection Capacity |
| |
It can be used to accurately and effectively inspect
materials for flaws such as corrosion, wear, pitting,
cracks and baffle cuts. |
| · |
Inspection of NFe and Fe Tubing |
| |
Inspection of non-ferromagnetic and ferromagnetic
tubing in petrochemical, chemical and power generator
plants. |
| · |
Easy Parameter Setting |
| |
All parameter settings and configurations are done
from the keyboard and can be individually stored and
retrieved from hard or flexible disk. |
| · |
Data Recording |
| |
Raw eddy current data is recorded as x- and y-
components of each channel on hard disk. An
intelligent data reduction algorithm ensures maximum
use of storage capacity. For per- moment storage, the
signals can be written to an optional installed optical
disk drive. |
| · |
Colored Real-Time Display |
| |
Colored real-time display of x-y impedance plane
and/or strip chart signals selectable from up to 4 signal
channels and 6 independent mixer channels. Each
channel may be assigned to any window, whereby in
each window all available channels may be displayed
at the same time. |
| · |
Hardcopy Function |
| |
The hardcopy function allows the output of the actual impedance plane image including instrument settings on matrix and compatible printers. |
| · |
Multi Mix Module |
| |
The innovative multi mix module with up to 6 free
adjustable mixer channels allows very effective
suppression of noise and disturbing signals e.g. baffle
plate signals. Due to the automatic mix function the
mixer is set within seconds by pressing only a single
key. |
| · |
Calibration Curve Generation |
| |
The generation of calibration curves, the signal phase
setting and phase grid display is done |
| · |
Signal Analysis Software |
| |
The automatic signal analysing software module
allows defect depth evaluation of differential signals. |
|
| |
|
| |
|
|
 |
 |
 |
|
 |
|
